Car Review Audi S5 Cabrio MTM Michelle 2010
Specialist machines in MTM Wettstetten proposed increase is enough to power the Audi S4 and the new Audi S5 Cabrio. Using the control device approved M-Cantronic, two cars, a motorcycle by the 3.0 TFSI engine, a powerful sports car with tremendous power reserve. The MTM S4 - which rejected the Avant models - the power of therapy, stands as the real successor to the Audi RS4, and now a V8 from the RS4 is only 10 bhp more powerful than the S4 MTM.
In addition to the engine control device M-Cantronic, MTM provides S4 car production by 4 pipe rear silencer with throttle valve. What results 430 bhp (317 kW), 515 Nm of torque and incredible 4.6 s 0-100 kph (0-60 mph) with a 6-speed manual gearbox. When the V-Cantronic also embedded and M-Cantronic, the normal speed of 250 kilometers per hour reachs 285 kilometers per hour.
In addition to the engine control device M-Cantronic, MTM provides S4 car production by 4 pipe rear silencer with throttle valve. What results 430 bhp (317 kW), 515 Nm of torque and incredible 4.6 s 0-100 kph (0-60 mph) with a 6-speed manual gearbox. When the V-Cantronic also embedded and M-Cantronic, the normal speed of 250 kilometers per hour reachs 285 kilometers per hour.
2010 MTM Audi S5 Cabrio Michelle Edition Front
S4 is not the only model vehicles with 3.0 L engine and new compressor technology. The S5 Cabrio is also built with factory-made machine. It is then logical that modify the MTM S5 Cabrio that enables roaming around with a big power reserve. The tuning specialists from MTM propose different stages of the show, starting with the 380 bhp (280 kW) and 480 Nm of torque, which means about 47 bhp more than the model series. The expected complement exhaust system with throttle valve in the back of the optical pipe 4 (4 x 80 mm), have access to the stage ultimo increase from 430 bhp power and 515 Nm.
So much power in the new MTM supercharged S4 brake system needs important, of course, that customers can be found in MTM. With 380 x 34 mm brake disks, drilled with 8-piston calipers, S4 reduce the speed much better. With the body work, trust MTM series models. However, MTM puts down new springs lower the car by 40 mm at the front and axes to 45 mm on the back of an ax. To achieve perfection, the package includes 19 "rims on the original Bimoto dimensional design with 255/35 ZR 19. Of course, the 20 "rims are also available in a choice.
No comments:
Post a Comment